Router login page won't open?

Pick what you see on the screen. Each answer leads to the checks that fix that problem, in the order most likely to help.

What happens when you open the router address?

Nothing loads, or "This site can't be reached"

Is your phone connected to the router's Wi-Fi right now?

Yes, I'm on its Wi-Fi

Try the address again after each step.

  1. Check it's your router's address. Open your Wi-Fi details and look for "Router" or "Gateway". Not every router uses 192.168.1.1. How to find it.
  2. Type http:// in front, for example http://192.168.1.1, so the browser opens exactly that address.
  3. Turn off mobile data for a minute. When the Wi-Fi is slow or has no internet, some phones quietly send traffic over mobile data, and the router can't be reached that way.
  4. Turn off any VPN app. Some VPNs send all traffic away from your home network, including the router address.
  5. Restart the router. Unplug it, wait 30 seconds, plug it back in and wait two minutes for the lights to settle.

Android

Mobile data: swipe down from the top of the screen and turn off "Mobile data" (on some phones the tile is called "Internet"). VPN: Settings, then search for "VPN".

iPhone

Mobile data: open Control Center and tap the antenna icon so it turns grey. Also check Settings, then "Mobile Data" (or "Cellular"), then "Wi-Fi Assist" at the bottom: when it's on, the iPhone switches to mobile data when the Wi-Fi is weak. VPN: Settings, then "VPN".

Common router addresses to try if you can't find yours:

On a computer instead

Windows: open Command Prompt and type ipconfig. The router address is the "Default Gateway" line. Mac: System Settings, Wi-Fi, "Details" next to your network, then "TCP/IP". It's the "Router" line.

A network cable from the computer to one of the router's LAN ports skips every Wi-Fi problem on this list.

On its Wi-Fi, but it says "No internet"

The router's own page doesn't need the internet. A Wi-Fi network without internet still connects you to the router, and the settings page is where you can see why the internet is down.

  1. If your phone asks whether to stay on a Wi-Fi network with no internet, choose to stay connected.
  2. Turn off mobile data, so the phone can't switch away from the Wi-Fi.
  3. Open the router address again. Its status page shows whether the internet line is connected.

On fibre routers, a red light labelled "LOS" means the fibre signal isn't arriving. That's a problem on the provider's side or in the cable: call your provider rather than resetting the router.

No, I'm on mobile data
Your router 192.168.1.1 Wi-Fi Mobile data Internet
The router's address exists only inside your home network. Over mobile data the phone asks the internet, and nothing there answers for that address.
  1. Turn on Wi-Fi and join your router's network. Its name and password are usually printed on the router's label.
  2. Open the router address again.

Can't join the Wi-Fi at all? Connect a computer to the router with a network cable, or see how to recover the router's passwords.

I'm not sure

Android

Swipe down from the top of the screen. The Wi-Fi or "Internet" tile shows the name of the network you're on. If it shows no Wi-Fi name, you're on mobile data.

iPhone

Open Settings, then "Wi-Fi". The network you're on has a tick next to it. At the top of the screen, a fan-shaped Wi-Fi icon shows instead of 4G or 5G when you're on Wi-Fi.

Make sure the name matches your router's network (it's often on the router's label), not a neighbour's or a free hotspot.

A search results page opens instead

The browser treated the address as words to search for. That happens when it's typed into a search box, or into the address bar without a scheme.

  1. Open Chrome, Safari or another browser. A search app or a search widget on the home screen can only search.
  2. Tap the address bar at the very top and delete everything in it.
  3. Type the full address with http:// in front, for example http://192.168.1.1, then tap Go or Enter. Don't tap a suggestion from the list.

Or skip the typing and use this button:

"Your connection is not private"

The router opened over https:// with a security certificate it made itself. Browsers don't recognise those, so they warn you. On your own router, at a private address, that's expected.

  1. Check the address starts with 192.168, 10., or 172.16 to 172.31. Those are private addresses inside your network.
  2. Chrome: tap "Advanced", then "Proceed to …" with the address. Safari: tap "Show Details", then "visit this website".
  3. Or open the same address with http:// instead of https://.

Only skip this warning for your own router's private address. Never for a bank, a shop or any other website.

The login page opens, but the password fails

Which password did you try?

The one printed on the router's label
  • Check the right line. Labels often list a Wi-Fi password ("Wi-Fi key", "WPA key") and a separate admin or login password.
  • Type it exactly. Capital and small letters count, and the digit 0 and the letter O look alike on small print.
  • If someone changed it when the router was installed, the label password no longer works. Ask whoever set it up, or your provider.
  • Some routers lock the login for a few minutes after several wrong tries. Wait, then try once more.

If none of this works, a reset brings back the label password, but it also erases your settings.

"admin" or another common default

Many routers made in the last few years have no shared default. They print a unique password on the label, or ask you to create one the first time you log in.

  • Look for "Password", "Admin password" or "Login" on the router's label.
  • If your provider installed it, the login may be in their papers or app.
  • Some routers lock the login for a few minutes after several wrong tries.
My Wi-Fi password

Most routers have two passwords: one to join the Wi-Fi, and one to log in to the settings page (the admin password). They're often different.

Look on the router's label for a line called "Admin password", "Login", "Web login" or "User password". If there's no such line, the router may use a default for its model, or one set during installation.

The one my browser filled in

Browsers remember passwords by address. If you once saved a login for this address, for example on another router, the browser fills in that old one.

  1. Clear the username and password fields completely.
  2. Type the login by hand.
  3. If it works, let the browser update the saved password, or delete the old one in the browser's password settings.
"Refused to connect"

A device at that address answered, but it isn't offering a settings page there.

  • You may be connected to a Wi-Fi extender or a second router. It has its own address. Open the "Router" or "Gateway" address from your Wi-Fi details instead of a common one.
  • Some routers only allow the settings page from a network cable, or have it switched off. A computer with a cable to a LAN port can tell you which.
  • Restart the router: unplug it for 30 seconds, then wait two minutes.
My provider's page or an app request appears

Some internet providers manage the router remotely and send you to their website or app instead of the local settings page. Others give customers only a limited login.

  • Use the provider's app or customer website to change the Wi-Fi name and password.
  • For anything else, contact the provider. They can change settings remotely.
  • Some mesh Wi-Fi systems have no settings page at all and are set up only in their own app.

Still stuck?

Connect a computer to the router with a network cable and try the same address. If it opens over the cable, the problem is on the phone or the Wi-Fi. If it still doesn't open, the router may need a reset, or a call to whoever supplied it.

Locked out for good? Recover the router's admin password.

Last checked 2026-11-20