Works only while you're connected to your router's Wi-Fi.
Typed an address and nothing opened?
l≠1letternumber
O≠0letternumber
On a phone keyboard the lowercase letter l looks almost like the number 1, so the address often gets typed as 192.168.l.l — that won't open anything; type 192.168.1.1 with numbers only.
Factory login from Türk Telekom's own manuals for these two models. This is the modem login, not your internet (PPPoE) username. Other Türk Telekom modems may print their login on the label.
WE prints the login and address on the label under the router; check it if admin / admin is rejected. WE's home WE Air page gives the same admin / admin login but points to the label for the address.
Newer NETGEAR products make you change the admin password at first setup, so the factory value only works on a unit that was never set up or was reset. NETGEAR lists 1234 for older models. Also check the label on the bottom of the router.
Password only, no username. E7350 and E8450 on current firmware need https:// (https://myrouter.local). 192.168.11.1 applies to the E5600 when it joins an existing network.
The label on the back or bottom of the router. Many newer routers print their own admin password there.
The password set when the router was installed. Check the papers or messages from your internet provider.
The default for your model, if it has one. Look it up.
If none of them work, a reset brings back the password on the label. With the router switched on, press and hold the small reset hole with a pin, usually for about 10 seconds.
A reset erases your Wi-Fi name, Wi-Fi password and every other setting. On a router from your internet provider it can also erase the internet connection settings, so ask the provider first. Full recovery guide
What 192.168.1.1 is
192.168.1.1 is a private address that many routers use for their settings page. It's part of the 192.168.0.0 to 192.168.255.255 range, which is kept for home and office networks and never used on the public internet.
That's why it opens only on a phone or computer connected to the router. Millions of homes use the same number, and in each one it leads to that home's own router.
Secure your router
Change the admin password if it's a simple default such as "admin". Make it different from the Wi-Fi password.
Turn on automatic firmware updates if the router offers them, or check for updates a few times a year.
Use WPA2 or WPA3 for Wi-Fi security. Never leave the network open or on WEP.
Turn off remote management (access from the internet) unless you need it.
Turn off WPS if you don't use it. Its PIN mode has known weaknesses.